invisibleSHIELD Front Coverage for Palm Pre

Other HP Veer accessories by invisibleSHIELD

This product doesn't work with your Veer.
View Veer Screen Protectors or Change Device

List Price:	~~$24.95~~
Price:	$14.95
You Save:	$10.00 (40% Off) Flat Rate Shipping Only $5.95

Part# A5708
Mnf# PALPRES
In Stock

Want it by Wednesday, May 30? Order it within the next 92 hours and 52 minutes and choose Next Day Shipping.

Product Description

Your search for a Palm Pre case, skin, or cover is now over. ZAGG's invisibleSHIELD is an exceptionally clear and virtually indestructible film that will protect your Pre from unsightly scratches. The exclusive, patented film – with nano-memory technology– covers and shields the front of your device, keeping it as pristine as the day you took it out of the box.

The precision pre-cut invisibleSHIELD applies directly to your Pre, providing the toughest, most durable protection you will find. The invisibleSHIELD has its origins in the military, where it was used to protect high-speed helicopter blades from dust, dirt and debris. Now you can use that same powerful technology to protect your Pre.

The invisibleSHIELD is only .2 millimeters thick making it the slimmest Pre skin or Pre cover of its kind. It is so tough that Zagg will back it with a lifetime guarantee. So, if it ever does wear or scratch, they will replace it for free, for the life of your device. And if you ever need to remove the invisibleSHIELD, no problem, it comes off clean and leaves no sticky residue.

Scratch-Proof, patented film
Military Grade, virtually indestructible
Lifetime Replacement Guarantee
No added bulk
Improves grip
Invisible protection
Easy to remove, leaving no sticky residue
Front Coverage Only

User Ratings & Opinions

92 total ratings
(32 reviews)

37% rated
14% rated
16% rated
9% rated
24% rated

Own this product?

Add your rating now:

Phenomenal!

User: Jonathan Snyder, Jan 21, 2010

I had no trouble putting it on. I do have a small "blemish" off screen which does not bother me at all.

Otherwise it has been completely scratch resistant for 2 months and is the BEST protector I have used by far across various phones!

Great for the Palm Pre

User: MARK CAMPBELL, Dec 29, 2009

Pros: Great Product
Cons: Need alot of patience to put on

Great product, air bubbles disapate after 24 hours, Its worth the $12 to have Best Buy put it on for you they will have it done in like 30 mins. Forms to the phone dont even notice its there. Come with a great life-time warranty definitely worth the investment if you wanna keep you phone looking brand-new.

Very Good Product....way overpriced!!!

User: Nick Howard, Dec 27, 2009

Pros: Definitely adds more grip, significantly reduces fingerprint smudge
Cons: Lots of liquid solution involved....

I bought the shield for my Pre because I wasnt so sure how the plastic touchscreen would hold up. Back in the day, I had an iphone with a glass screen and left the screen naked. I opted to install the shield myself rather than pay best buy, as many have suggested. Honestly, installation was dead simple. After watching a couple of youtube videos the main consensus is to douse the invisishield in the application solution. The most tedious (aka not hard!) part of installation was the bottom and top corners, they did not want to stay down. All in all it took me about 15-20 min to install. All in all it adds more grip, great protection and really reduces the smudges. Also it is definitely overpriced...should be .50

NOTE: There is a lot of liquid solution involved and if you dont want to risk frying your pre I highly suggest removing the battery. After installation I did see some of the application solution around the battery cover.

Great Product- installation tips below

User: Evan Lema, Oct 16, 2009

Pros: amazing protection, helps allow you to stop babying the phone
Cons: can be tricky to apply

as others have noted, it can be tricky to apply. it is definitely worth the money though, as it offers amazing scratch protection to the screen.

APPLICATION ADVICE:

1- first off, if you read the directions it notes that you can refill the sponge container with water 3 times and it still retains perfect install quality. this is useful if esp. if it takes more then one attempt to get it on as you need more liquid. so have some ready to pour into the container

2-the main part of the shield clings easily, however it can be hard to keep the small edge parts clinging to the phone while it dries. WRAP THE PHONE IN THE PROVIDED MICROFIBER CLOTH. place the phone screen side down on the cloth, and then wrap the cloth up around the back of the phone with tension. while holding it in place, use scotch tape to secure the cloth. the soft cloth held tight on all sides around the phone while it dries keeps the hard to manage edge pieces in place.

it took me 4 attempts to get it lined up perfectly, but through these tricks i got a perfect installation.

i use mine in addition to the seido innocase, so the phone is 100 protected. I can treat it like a cheap flip phone and there is never any damage

good luck hope this helps

Excellent Product but a pain to put on!!!

User: Francesca Aiello, Oct 4, 2009

Pros: Amazing Once Installed!!
Cons: The included applicator sponge & Non-squeegee

Okay, so I just bought my Palm Pre and was very excited about the full-body invisible shield they offered. I washed my hands as instructed, and came to find this wierd little sponge. I attempted to put on the face cover, and wow. The card thing that comes included as the squeegee (cheap and not functional) Not happening. I gave up for two days. Then, I decided that I had calmed down and had a little more patience, and I found an old kit from my previous phone the instinct which included a spray bottle of the solution, as well as an actual squeegee. I first applied the backside, and then the front and was absolutely AMAZED!!! There are a couple of tricks I would recommend. 1. Completely soak the shield before application 2. Trim the edges just a little bit (even though mine is pretty well aligned, I can see how I shouldve trimmed the edges just a tad bit 3. Wait for about 2 minutes before attempting to stick the sides of the shield to the phone. It needs to set a little bit- so do the front and back side flat parts first, then wait for the sides. I just did this today, and as the hours go on, the phone is truly looking better and better. I am very happy with it and look forward to the future months to come. My main recommendation is to find another kit with the spray bottle and actual squeegee!!! Best of luck friends!!

See all 32 User Opinions...